Why BORPower® is different
Many will have heard of so-called 'additives', but BORPower® is different. It's the only product:
1. With publicly declared tests and certificates from around the world, performed by independent organisations showing a reduction in fuel consumption based scientific formula, approved by vehicle bodies and Governments.
2. Based upon a physical process, not involving any chemical reaction with the engine oil since it is chemically inert. BORPower® is non-toxic, non-acidic and therefore environmentally friendly.
3. Which is an all-in-one, long term solution. Other products last from 1,000 miles (liquid lubricants) to 25,000
(solid lubricants) whereas BORPower® lasts for up to 40,000 miles.
Scientifically proven to improve fuel consumption
The quality and effectiveness of BORPower® has been validated several times by accredited industrial and scientific research and testing facilities in the USA and Europe and now in the UK.
Each facility, including Southwest Research Institute San Antonio Texas, USA and TÜV NORD, Germany (Technical Inspection Agency), Hanover found that BORPower® improved fuel efficiency by up to 15%.
In the recent independent UK tests at the MIRA Vehicle Test Track (October 2008), Roger Dennis, (independent mechanical engineer and specialist fleet efficiency consultant [ ref 4]) found a saving of over 10% on a three-axle 21 tonne flatbed for the high speed track trial simulating highway driving and over 11% for the low speed track trial simulating heavy traffic scenarios [ref 5].
How BORPower® works
BORPower® combines the use of the chemical element boron and nanotechnology. Nanotechnology is the relatively unknown, but growing field dealing with the tiny world of atoms and molecules. One nanometer (nm) is one billionth, or 10-9 of a metre. To put that scale into context, the comparative size of a nanometer to a metre is the same as that of a marble to the size of the earth. Within the periodic table, Boron has the symbol B, atomic number 5, a small density and is very heat resistant.
The raw boron goes through the nanotechnology process and becomes boron diamond powder (MCDP), frequently called the 'Brother Of Diamond' due to its hardness, scoring 9.3 on the Mohs scale of hardness. It ranks just below diamond (10 Mohs), the hardest substance known to man.
BORPower® works by building up boron metal films in the engine's inner parts which prevents direct contact between the frictional surfaces responsible for abrasion, friction and heat. BORPower® helps by cooling down these frictional surfaces and sealing them.
BORPower® contains two active ingredients: boron diamond powder (MCDP) and nano boron. Under high pressure between two metal surfaces, the MCDP crystals are pressed into the material to form a coating. This coating is near diamond-hard, but at the same time very slippery.
The nano boron forms a low-friction, solid lubricant film between these coatings. MCDP not integrated into the metal surface act also like tiny ball-bearings, which further reduces friction and abrasion by transforming the sliding friction into much less abrasive rolling friction.
|
